Products

CURRENT DENSITY METER (CD200)

        *    Not influenced by chemistry of plating bath

        *    Reads directly in Amps/ft²

        *    Chemical resistant probe available up to 9 ft. long

        *    Battery and charger included

        *    Amps/dm² available upon request

        *    NIST traceable certificate of calibration optional

I³’s CD200 Current Density Meter allows electroplaters to know exactly where on the work piece the material is being deposited, as well as the rate of deposit. A small toroidal current probe is placed inside the plating bath near the work piece. A digital display on the instrument indicates the current density at that point in A/ft² or A/dm². By Faraday’s Law, this current density is directly proportional to the rate at which material is being deposited on the work piece.

CD200 Current Density Meter	Range: 0.1 - 1999 A/ft2 Probe Length: 2 ft	$1895
Option	Range 0.01 - 199.9 A/dm2	N/C
Option	Probe Lengths > 2 ft.	$15/ft.
Option	Recorder Output	$55
Option	Certificate of Calibration.	$150

             * Prices subject to change.  Prices in US Dollars.

CURRENT DENSITY METER (CD300)

     *   Handheld version of our award winning CD200.

     *   Powered by standard 9V battery.

     *   Range:  1 to 1999 A/ft².

Introducing the new CD300, a lightweight, handheld instrument designed for convenient use in the plating shop.  Also available with 0.75 inch diameter probe for easier location of current densities in large tanks or hard to reach locations.  

CD300 Current Density Meter	Range: 1 - 1999 A/ft2 Probe Length: 2 ft	$1350
Option	Range 0.1 - 199.9 A/dm2	N/C
Option	Probe Lengths > 2 ft.	$15/ft.
Option	Certificate of Calibration.	$150

             * Prices subject to change.  Prices in US Dollars.

GEARLESS CONTRACTOMETER (C100 series)

            *    Eliminate product waste caused by plating stress.

            *    Reliable gearless design.

            *    Indispensable quality control tool.

The gearless contractometer measures stress in the electrodeposited part that will blister or peel off if the stress is severe. Excessive stress can cause distortion in the work piece so that the work has to be scrapped and can cause premature failure by accelerating corrosion. By measuring the angular deflection of a helix that has been plated on one, the amount of stress can be determined. Our instrument is gearless for greater reproducibility and reduced backlash.

C101 Gearless Contractometer	Contactometer with Calibration Assembly, Carrying Case	$1089.00
C100 Complete system.	Contractometer with 10A Plating Power Supply (C105).  4000 ml Beaker (C102).  Titanium Anode Basket (C104).	$2740 (115V)  $2950 (230V)
C102	4000 ml Pyrex Beaker	$150.00
C103	Titanium Anode Basket.	$275.00
C104	Stirring Hot Plate.	$426 (115V)     $469 (230V)
C105	Precision 10A Power supply with timer.	$850 (115V)    $988 (230V)
C106	Helix  (Stainless Steel or Copper)	$70.00 Sale Price (Through Feb.)
C107	Spare Parts Kit. (Screws, Drills, etc.)	$55.00

           *  Prices Subject to Change.  Prices in US Dollars.

ELECTRONIC GEARLESS CONTRACTOMETER (ESC 100)

     *   Repeatable digital measurement of helix deflection.

     *   Accurate to 0.1 degree.

     *   Precision angular displacement transducer.

     *   Powered by standard 9V battery.

     *   For use with ASTM procedure for measuring plating stress.

This new precision electronic instrument combines the simple gearless design of our reliable Gearless Contractometer with the precision and repeatability of a digital LCD readout.

ESC101 Gearless Contractometer	Contactometer with Calibration Assembly, Carrying Case	$2495.00
ESC100 Complete system.	Contractometer with 10A Plating Power Supply (C105).  4000 ml Beaker (C102).  Titanium Anode Basket (C104).	$4130 (115V)  $4310 (230V)
C102	4000 ml Pyrex Beaker	$150.00
C103	Titanium Anode Basket.	$275.00
C104	Stirring Hot Plate.	$426 (115V)     $469 (230V)
C105	Precision 10A Power supply with timer.	$850 (115V)    $988 (230V)
C106	Helix  (Stainless Steel or Copper)	$70.00 Sale Price (Through Feb.)
C107	Spare Parts Kit. (Screws, Drills, etc.)	$55.00

           *  Prices Subject to Change.  Prices in US Dollars.

PRECISION AMPERE-HOUR METER (AH100)

*   Measures Ampere-Seconds, Ampere-Minutes and
     Ampere-Hours, as well as current in Amperes.

*   Calculates total weight of deposit and plating thickness. (For 21
     specific metal ions)

*   Full keypad and two line LCD display make programming
     easy and intuitive.

*   Chemical and moisture resistant NEMA case.

*   Controller output turns rectifier off automatically.  Audible
     alarm sounds when preset  limit is reached.

*   Compatible with 50 mV or 100 mV shunts of virtually all
     current ratings..